R&G Epoxy Resin HT 2 with Hardener HT 2 is a highly transparent, cold-curing epoxy resin system designed for high-quality laminates, composite components and reliable bonding applications. Its very low viscosity allows glass, aramid and carbon fibres to be impregnated evenly and thoroughly.
The almost water-clear resin system is largely UV-stable and cures to a tack-free surface even when applied in very thin layers. Particularly transparent laminates can be produced in combination with finished glass fabrics, such as fabrics featuring an FK 144 or FK 800 finish.
In addition to laminating, the epoxy resin system is suitable for bonding materials such as wood, metal and polystyrene. It can be used with a wide range of common processing methods, including hand laminating, pressure and vacuum impregnation, pressing and filament winding.
Product features:
- Highly transparent and almost water-clear
- Largely UV-stable
- Tack-free curing even in very thin layers
- Very low-viscosity consistency
- Solvent-free and filler-free
- Cold-curing epoxy resin system
- Excellent impregnation of glass, aramid and carbon fibres
- Suitable for highly transparent laminates
- Suitable for bonding wood, metal, polystyrene and other materials
Technical specifications:
- Resin system: Epoxy Resin HT 2 with Hardener HT 2
- Working time: approximately 45 minutes
- Mixing ratio of resin to hardener: 100 : 48 by weight
- Curing time: approximately 24 hours
- Resin viscosity at 25 °C: approximately 400 mPa·s
- Curing method: cold-curing
- Total contents: 296 g
Suitable processing methods:
- Hand laminating
- Pressure impregnation
- Vacuum impregnation
- Pressing
- Filament winding
- Bonding different materials
Application information:
Resin and hardener must be mixed thoroughly and completely in the specified ratio. Make sure to include the bottom and sides of the mixing container. For optimum results, all bonding and laminating surfaces must be clean, dry and free from grease, dust and release agents.
