Graupner - MZ-24 Pro single transmitter HoTT

Graupner

Graupner - MZ-24 Pro single transmitter HoTT

SKU: 314918

Category: Graupner

Manufacturernumber: S1006.PRO.77
GTIN: 8809403498238

579,90 €

incl. 19% VAT , plus

Lager Lieferant

Lieferzeit: Must be ordered. Ready for shipment in 3-6 days after order.

Notify me when this product is available

piece

Lager Lieferant

Lieferzeit: Must be ordered. Ready for shipment in 3-6 days after order.

The mz-24 was the remote control of the year 2015 in the reader's choice of FMT. Graupner did not rest on this success and developed the improved mz-24 PRO transmitter with 12 channels - from professionals for professionals. This package includes the mz-24 PRO transmitter, as well as a micro-SD card, transmitter battery, charger and many accessory cables.

Large color display
The mz-24 PRO features a 3.5 inch color display that can show you all relevant telemetry data in real time. Use the large TFT color touch display to program and optimize up to 30 model memories, 6 flight phases, and 5 linear and 3 curve mixers - directly from the transmitter, without additional hardware.

Voice output that interests you
The intelligent voice output reports telemetry data, alarms and vario signals. The alerts can be set. The mz-24 PRO has a range test function and warns in time of connection problems.

Telemetry to keep you informed
Telemetry data and model settings can be stored on micro-SD card or transferred using a USB cable. Evaluate your flight and optimize your settings. If 30 internal model memories are not enough for you, additional models can be stored on the micro-SD card.

Future-proof
Software and firmware updates can be easily performed using the included USB cable.

General Features

Built-in front speaker for voice and music Output
HoTT bi-direktionale 2.4GHz Technologie mit 75 Sprungfrequenzen
12 channels
3.5 TFT color touch Display
Intelligent voice output via speaker or headphones
Real-time data transmission with optional sensors (vario, GPS, fuel, temperature, voltage, current, RPM and more)
Teacher/student system wireless or wired
Bindung mehrerer Empfänger möglich
micro-SD card Slot
30 model memories
Model copy function
Updateable via USB
Numerous servo settings (travel, limit, reverse, center position)
DualRate and Expo, separately adjustable for each flight Phase
6 flight phases
Helicopter type: 1 servo, 2 servo 180°, 3 servo 120° (2 pitch or 2 roll), 3 servo 140°, 4 servo 90°
Pitch curves (7 points) adjustable separately for each flight Phase
Throttle curves (7 points) adjustable separately for each flight Phase
Phase trims for pitch and throttle
Swashplate limiter function
Swashplate mixing function
5 linear Mixers
3 curve Mixers
Numerous flight model types from 1QR to 8-flap surfaces (1QR, 1QR1WK, 2QR, 2QR1WK, 2QR2WK, 2QR4WK, 4QR2WK, 4QR4WK)
Elevator: 1 HR, 2HR, V-tail
Snap roll function
Aileron differentiation, adjustable separately for each flight Phase
Butterfly function
Ball bearing aluminum stick assemblies (total 8 ball bearings)
Red applications on the transmitter top
5000 mAh lithium transmitter battery
new menu for channel sequencer
additional model types for car, boat and copter
Menu for logical switches
Menu for announcements, flight phase names are announced when switching, announcements can be put on any switch, FW on/off flaps on/off, instructor, student etc.
up to 10 user voice files can be imported into the transmitter and assigned.
RF can be switched off and on via a security prompt.
both clocks are freely configurable by the user, reset function via switch/button or by briefly tapping the number field
The engine stop function can also be used for helicopters, the engine can be switched off in any throttle Position
3 different EXPO/DR values can be switched via a 3-step switch
all warnings are model memory related usable, so different warnings for each model memory.
the switching off of the trim for mixed channels in the menu free mixers is possible
a reduction of the QR differentiation is possible
SnapRoll for gliders and fixed wing models
Auto trim function
Simple and extremely fast binding
Free channel mapping, transmitter and receiver mix functions and all servo settings easily programmable
Binding of any number of receivers for channel expansion (max. 16 channels). The last bound receiver sends the telemetry data.
Zukunftssicher durch Updatefähigkeit über USB-Schnittstelle
Deutschsprachige Menüführung (weitere Sprachen auf beiliegender SD-Karte)
Maximum safety
Extremely high range
FHSS, frequency hopping over up to 75 channels
Maximum immunity to interference through optimized frequency hopping, wide channel spread and antenna diversification
Intelligent data transmission with correction function
Range test and warning function
Undervoltage warning
Extremely wide receiver operating voltage range from 3.6 V to 8.4 V (functional down to 2.5 V)
Numerous fail-safe functions
Key-lock function against unintentional adjustment of menus

Highest precision

Shorter response times adjustable (10ms period time)
No additional delays due to module processors. All hopping management is done directly by the 32-bit main processor.
Synchronous servo run possible by simultaneous control of the servo outputs in blocks of 4
Telemetry evaluation in real time
Wireless instructor/student function

Scope of delivery

mz-24 PRO HoTT Transmitter
5000mAh LiPo transmitter battery
SD card Adapter
Micro SD card 8GB
USB cable
USB PC Interface Adapter
USB adapter cable
Transmitter belt
Aluminum case

Technical data

Channels: 12
Model memory: 30
Dimensions approx: 205 x 194 x 115 mm
Weight approx: 970 g
Frequency: 2400 ... 2483.5 MHz
Modulation: 2.4 GHz FHSS
Range: approx. 4000 m
Stromaufnahme: 670 mA
Operating voltage: 3.4V to 6V
Temperature range: -15 to +55°C

Contact data

First name

Last name

E-Mail