SkyRC - Infrared Thermometer ITP380

SKU: 331916
GTIN: 6930460006745
HAN: SK500037-01
Category: measure
Manufacturers: SLEC

41,71 €

incl. 19% VAT , plus

Currently out of stock
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

piece

The compact SkyRC ITP380 infrared thermometer is used for safe and contactless measurement of the temperature of special surfaces such as motors, chargers or entire vehicles. Compared to its predecessor, SkyRC uses a classic TO-46 thermopile sensor. The sensor element, consisting of 116 elements of small thermocouples with an active area of 545 µm diameter on a silicon chip, absorbs the energy and thus generates the output signal. Depending on the surface, however, the measured value can deviate despite the same temperature. For this purpose, the thermometer can be tuned to just these different surfaces to display a more accurate result.

Features:

Large measurement range -40°C (-40°F) up to 380°C (716°F)
Highly precise and fast infrared sensor
Four measurement methods: quick mode / scan mode / max. Value / Min. Value
Unit of measurement in Celsius or Fahrenheit
The emissivity coefficient can be adjusted
The large LCD display can show the temperature, emissivity coefficient and battery capacity
With backlight to read the values more easily
The meter has low power consumption
Auto shut-off after 1 minute to increase battery life

Application:

There are 4 methods of measurement. First, point the sensor at the top of the meter directly at the object to be measured, and perform one of the following actions:

Quick Mode: press the "MEASURE"button once to measure the current temperature and show it on the display.
Scan Mode: Move the aluminum cap as close as possible to the object. Press and hold the "MEASURE"button to measure the temperature continuously. The display will keep showing the temperature updated. After releasing the "MEASURE"button, the last measured temperature will be displayed.
Maximum Temperature Mode: point the aluminum cap at the object to be measured, press the "Mode"button once and hold down the "MEASURE"button. The thermometer will display the hottest or maximum temperature that has been measured.
Minimum Temperature Mode: Point the aluminum cap at the object to be measured, press the "Mode"button twice and hold the "MEASURE"button. The thermometer will display the coldest or minimum temperature that was measured.

Technical data:

Battery voltage: 2x AAA battery
Operating current: up to 40mA at 3V
Operating temperature: 0-50°C
Current consumption: up to 25ua at 3V
Infrared radiation coefficient frequency setting range: 0.01-1
Weight: 75g
Dimensions: 121x40x39.6mm
Accuracy:
- -40°C - 0°C (+/- 1.5°C)
- 0°C - 380°C (+/- -1.5°C)
- -40°F - 32°F (+/- 3°F)
- 32°F - 716°F (+/- 3°F)