KST - 7mm digital servo X06H V6 soft start

KST - 7mm digital servo X06H V6 soft start

KST - 7mm digital servo X06H V6 soft start

KST - 7mm digital servo X06H V6 soft start

KST - 7mm digital servo X06H V6 soft start

SKU: 349789

Category: servo finder

Manufacturers: KST
GTIN: 4260461684003
HAN: KST-0054

41,90 €

only

40,64 €

incl. 19% VAT , plus

Currently out of stock

piece

Currently out of stock

The KST X06 was developed for DLG's of the classes F3K and F5K. We also recommend the servo for thermal gliders up to 500g takeoff weight. The KST X06 is a super small digital servo. It is especially well suited for models where fast response times and high reset accuracy are important.

With approx. 1.5Kg actuating force and only 7mm overall height, the small X06 is ideal for use in smaller RC flight models. The X06 is suitable for wing models with up to approx. 500g take-off weight.

Technical data:

Dimensions: 20 x 7 x 16.6mm
Torque at 3,8V: 0,8kg/cm
Torque at 6,0V: 1,5kg/cm
Torque at 8.4V: 1.8kg/cm
Operating time at 3.8V: 0.12sec/60°
Operating time at 6V: 0.08sec/60°
Operating time at 8.4V: 0.07sec/60°
Voltage range: 4.5 to 8.4V
Frequency: 1520us/333Hz, 1000-2000us
cable length: approx. 15cm
Weight: approx. 6g
Motor type: Coreless
Frequency range: 1520us/333Hz, 1000us-2000us
Gear type: Steel
Bearing type: 1BB
Gear teeth: 15T-4
Servo type: F3K/ F5K
Electronics: Digital
Position sensor: Potentiometer
Waterproof: No
Manufacturer: KST

Item information	Value
width:	7,0mm - 12,0mm
actuating force 6V:	0kg/cm - 2,2kg/cm
weight:	0,0g - 15,0g
actuating time 6v:	0,10 - 0,15 sec bei 60°

KST - 7mm Digitalservo X06 V6 Softstart

KST - 7mm Digitalservo X06 V6 Softstart

Available immediately
guter Lagerbestand

Lieferzeit: 1-2 Werktage

only

40,64 € *

Discount: 3%

G-Force RC - plastic clevis - carbon rod 1,5mm (5 pieces)

G-Force RC - plastic clevis - carbon rod 1,5mm (5 pieces)

Available immediately
guter Lagerbestand

Lieferzeit: 1-2 Werktage

4,90 € *

0,98 € per 1

KST - 8mm Digitalservo A08 HV 2S LiPo V6.0

KST - 8mm Digitalservo A08 HV 2S LiPo V6.0

Available immediately
geringer Lagerbestand

Lieferzeit: 1-2 Werktage

only

50,34 € *

Discount: 3%

Einschlagmuttern M3 (10 Stück)

Einschlagmuttern M3 (10 Stück)

Available immediately
guter Lagerbestand

Lieferzeit: 1-2 Werktage

4,90 € *

0,49 € per 1

Deluxe - Foam2Foam glue - 50ml

Deluxe - Foam2Foam glue - 50ml

Available immediately
mehr als 10 lagernd!

Lieferzeit: 1-2 Werktage

10,90 € *

21,80 € per 100 ml

Voltmaster - Servo connector 8-pin, plug & socket...

Voltmaster - Servo connector 8-pin, plug & socket with PCB (2 pairs)

Available immediately
mehr als 10 lagernd!

Lieferzeit: 1-2 Werktage

10,90 € *