KST - 15mm Digitalservo X15-855 X V3.0

SKU: 357312
GTIN: 4897073542133
HAN: KST-0308
Category: servo finder
Manufacturers: KST

The programmable KST X15-855X V3.0 is a fast 15 mm HV tail servo featuring a brushless motor, steel gears, a 760 µs centre pulse and up to 15 kgf·cm of torque.

only

102,80 €

incl. 19% VAT , plus

Old price: 104,90 €

Available immediately!
Limited quantity available
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

piece

The KST X15-855X V3.0 is a powerful digital 15 mm HV tail servo designed for demanding RC helicopters. Its fast brushless motor, robust steel gears and transit speed of up to 0.05 seconds per 60 degrees provide exceptionally quick and precise tail rotor control.

At an operating voltage of 8.4 volts, the servo delivers 15 kgf·cm of torque, equivalent to approximately 1.5 Nm. Its robust housing, dual ball bearings and 25T-6 output spline provide reliable power transmission and excellent durability.

The X15-855X uses a 760 µs centre pulse and supports a frequency of up to 560 Hz. It is specifically designed for compatible gyro and flybarless systems. The servo must only be connected to an output expressly designed for 760 µs tail servos.

Soft start and additional servo parameters can be programmed using the KST Tool #3 or KST Tool #5. This allows the servo to be adapted to the model and the pilot’s individual requirements.

Features:

Fast digital HV tail servo
Slim 15 mm midi servo
760 µs centre pulse
Frequency up to 560 Hz
Programmable electronics
Programmable soft start
Powerful brushless motor
Robust steel gears
Dual ball bearings
25T-6 output spline
Upright mounting tabs
Potentiometer position sensor

Specifications:

Operating voltage: 6.0 to 8.4 V
Torque at 6.0 V: 10.0 kgf·cm
Torque at 7.4 V: 13.0 kgf·cm
Torque at 8.4 V: 15.0 kgf·cm
Transit speed at 6.0 V: 0.07 s/60°
Transit speed at 7.4 V: 0.06 s/60°
Transit speed at 8.4 V: 0.05 s/60°
Pulse range: 450 to 1,050 µs
Centre pulse and frequency: 760 µs / 560 Hz
Width: 15.0 mm
Length: 35.5 mm
Height: 35.5 mm
Weight: 45.0 g
Motor: Brushless
Gear type: Steel
Bearings: 2 ball bearings
Output spline: 25T-6
Electronics: Digital
Position sensor: Potentiometer
Waterproof: No
Programmable: Yes
Compatible programming devices: KST Tool #3 and KST Tool #5

Important information:

This servo uses a 760 µs centre pulse and is not suitable for conventional 1,520 µs servo outputs. Before connecting the servo, please check the servo specifications and settings of the gyro or flybarless system being used.

Included: