Hacker Motor

Jeti - Central Box 310

SKU: 343312

Category: Jeti

Manufacturers: Hacker Motor
GTIN: 80001700
HAN: 80001700

368,90 €

incl. 19% VAT , plus

Available immediately
mehr als 10 lagernd!

Lieferzeit: 1-2 Werktage

piece

Available immediately
mehr als 10 lagernd!

Lieferzeit: 1-2 Werktage

Description
Reviews

The Central Box 310 is designed for comprehensive management of multiple servos and two receiver batteries for a model with high safety requirements. The Central Box 310 has full undiminished power from the internal BEC at the servo outputs. Specifically designed for use with even powerful and power-hungry servos, the Central Box 310 uses an aluminum housing and eliminates overcurrent protection for the servo slots. The Central Box 310 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for complete power and RF signal redundancy.

Configuration via JETI Duplex DS/DC Transmitter

With JETI Duplex DC/DS transmitters the full potential of the Central Box 310 can be used. Via the device overview of the JETI Duplex DS/DC transmitter, the entire configuration of the servo outputs, DITEX servo as well as JETI EX telemetry, function assignment etc. can be done very easily.

Compatibility with Futaba S.Bus

The Central Box 310 can also be used with two S.Bus receivers (e.g. Futaba R7003SB). However, settings and reading of telemetry values must be done via a separately available JETIBOX.

Switching on and off

The power-on and power-off operation of the Central Box 310 is performed with the supplied magnetic switch transmitter.

Recommended receivers:

For example, 2 RSat2 or also REX3 receivers can be used as receivers. Optionally, the use of a REX Assist receiver together with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization. Features: Adjustable powerful BEC for voltage stabilization (connect standard or HV servos).
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacitance, temperature, etc.)
Easy setting changes via DC/DS transmitter ("Device Explorer")
Rugged metal construction with mounting holes

Optional overload protection:
The Central Box 310 has been designed without the built-in overload protection of the individual servo slots. To protect critical servos such as tow release, retractable gear or jamming flap servos, the optionally available DPSI OCP overload protection (Accessories tab) can be used.

Technical data:

Servo Slots: 18
receiver Slots: up to 3
Satellite support: Yes
Telemetry: Yes
DITEX servo telemetry: Yes
Battery Inputs: 2
Power supply: 4.0 to 14.0V
voltage Regulator: 5.0 to 8.4
continuous current: 20A
Peak current (approx. 2 seconds): 80A
Idle current [µA]: 180
operating temperature [°C] -20 to 75°C
Dimensions: 66x107x21mm
Weight: 135g

Scope of delivery:

1 JETI Duplex 2.4EX Central Box 310
1 Magnetic switch
1 Magnetic key
1 Patch cable

Manufacturer information:

Hacker Motor GmbH
Schinderstraßl 32
Bayern
Ergolding, Deutschland, 84030
info@hacker-motor.com
https://www.hacker-motor.com