Optotronix RC - Scale Elektronik Optotronix FireFly LCU EVO2

SKU: 272464

Category: Optotronix

Manufacturernumber: OPT1055
GTIN: 4047991012465

49,90 €

incl. 19% VAT , plus

Lager Lieferant

Lieferzeit: Must be ordered. Ready for shipment in 3-6 days after order.

Notify me when this product is available

piece

Lager Lieferant

Lieferzeit: Must be ordered. Ready for shipment in 3-6 days after order.

The new FireFly LCU EVO2 offers a doubled output power of 5A per output and now even more true-to-life flash sequences (24) and beacon all-round lights (4). New on board are the soft-start dimming effect (optional slow dimming up of the output instead of hard switching on) and the fully random afterburner simulation (10 different flame effects).

Add more light power:
3 outputs each with an output power of up to 5A continuous current for even more light power.

Lightweight:
With unbeaten 16x48mm and 5g (!) weight, the FireFly LCU EVO2 offers concentrated light output in the smallest of spaces.

Child friendly operation:
An easy-to-use pushbutton and 5 status LEDs allow easy, fast and direct operation and programming at any time. No complicated programming via the PC.

Flexible and intelligent:
Activation point and function can be taught in for each output and this very easily at the touch of a button. No more tedious programming of activation points into the transmitter as with competitor products, the FireFly LCU EVO2 adapts completely to the transmitter used. The intelligent firmware of the FireFly LCU EVO2 allows you to easily program the RC lighting!

Numerous flash frequencies and dimming effects are available, whereby the desired time of the flash can also be selected in each case. Various beacon dimming functions very realistically imitate so-called rotating beracons.
Also new and especially chic for the "old ladies" among the flying models: the soft-start dimming function! Each output with permanent light can either be switched on hard or dimmed up slowly if desired.

8 different flash sequences, at 3 different times each selectable 4 Beacon Effeke (for the simulation of rotation lights)
Soft-Start dimming function for each output separately and arbitrarily selectable (e.g.In addition, the control of LEDs and afterburner rings with 10 (!) different, true to original, fully randomly generated afterburner effects is possible as you do not know it from any competitor product: No second of the afterburner simulation is like the other.

You can choose between different start modes (ignition behavior), which are 100% based on the originals. Thus every jet, no matter if small fun model or large scale model, can be upgraded with the appropriate afterburner effect.

This is how your model flight lighting looks like with the large original:

9 different afterburner effects for impeller and turbine models
1 Proportional afterburner effect: The afterburner effect dims from 0% gas on proportionally high up to the freely programmable "Zündpunkt" of the afterburner.
full random flicker behavior
different start modes: high-gloss, misfire, multiple misfire, 2-phase high-gloss...
balance effect on deactivation
Control of single LEDs, afterburner rings,...

FailSafe Emergency Lighting:
A very important and useful function is the indication of signal distortions during flight, live in the sky. If the model is in FailSafe mode due to signal errors, the FireFly LCU EVO2 switches to emergency lighting mode. All outputs ? also landing lights and position lights flash very fast.

Operation up to 13V:
The FireFly LCU EVO2 is powered directly by the receiver or the BEC, but can now also be operated with up to 13V (3s LiPo).

Stand Alone:
On push of a button you can switch to standalone mode ? the selected outputs remain active even without receiver signal. Ideal for exhibitions and building evaluations.

Battery monitoring:
The state of charge of the battery can be queried in six stages at the touch of a button. If the battery voltage is critical, a warning is issued and the LCU stops operation. If the battery is not disconnected from the electronics, the electronics automatically stops operation.If the battery is not disconnected from the electronics, the electronics will automatically stop operation.

As an accessory the Light Plug 6 is available, a plug connector with gold-plated contacts which simplifies and accelerates the lighting of the model. Compatible with innoflyer headlights and light modules
innoflyer headlights, light modules and combination light modules can also be used in conjunction with Optotronix light control modules and a 1S LiPo/LiIon battery. For this purpose, a separately available lighting resistor must be plugged in between the lighting control module and the headlamp.

Technical data:

Dimensions: 48 x 16mm
Operating voltage 3.1 ... 13V Volt (1s/2s/3s Lipo, 2s/3s LiFePO, BEC)
Max. Current LCU output 5A
outputs: 3
flash sequences: 24
Beacon effects: 4
Afterburner effects: 4
stand-alone operation: yes
Updatefähig: yes
Servo pulse amplifier: yes
Galvanic isolation: no, BEC power supply
Weight: 5g