SM Modellbau - LiPoWatch without USB- Interface

SKU: 235441

Category: LiPo Watch

Manufacturernumber: 2601

Die Einzelzellenüberwachung schützt Ihren Antriebsakku vor Tiefentladung und speichert gleichzeitig als Datenlogger die Spannung jeder einzelnen Zelle.

69,00 €

incl. 19% VAT , plus

Currently out of stock

Notify me when this product is available

piece

Currently out of stock

The single cell überwachung schützt your drive battery from deep discharge and simultaneously stores as a data logger the voltage of each cell.

The LiPoWatch is a single cell überwachung für up to 15 zellige (15S) LiPo and LiFePo batteries. It monitors each cell of the battery pack and can shut down the drive when the battery voltage falls below an adjustable threshold so that the cells are not deeply discharged. The externally connectable beeper (Order No. 2610) reports when the voltage falls below the threshold and other errors.
In addition, the LiPoWatch records the voltages of all connected cells individually and thus serves as a data logger for monitoring the battery. The built-in memory is so large that easily the fluxes of an entire weekend can be recorded.
In addition to the voltages, a temperature can also be measured with our standard temperature sensor and stored.
A red LED at each cell connection allows the quick Überblick, which cell in the pack has triggered the undervoltage message or other warning.

Über our UniDisplay can be all measured values of the LiPoWatch directly at the airfield read out and viewed. Likewise, the minimum values of the last measurement series can be read. A live display is also possible. All settings, such as the storage rate, can of course also be conveniently programmed via the display. The evaluation of the data is uncomplicated with the well-known software LogView or the GNU DataExplorer.
Because of its low weight and compact size, the LiPoWatch can be used in almost any area. With only 11 g it is just as suitable für the Überwachung in the small 2s model or Hubi with 3 cells, as in the 3 meter aerobatic plane with 14s power drive.

And that can the LiPoWatch:

Überwachung and measurement of 2s to 15s batteries with data logger.
Control / shutdown of the drive with adjustable parameters.
direct display of errors of a cell with a separate LED each.
Connection für a temperature sensor (order no. 2220)
Connection für an external signal generator / beeper (Order No. 2610)
Recording of the internal temperature
Recording of the servo pulse from the receiver and the servo pulse to the controller.
giant internal data memory for almost 75000 measurement data records (depending on the number of cells).
Memory rates of 4 measurements per second to 1 measurement every 10 seconds allow a recording time of up to über 200 hours (depending on the number of cells)
Power supply automatically by the drive battery.
Start of recording triggered by time lapse, voltage dip or receiver pulse.
manual recording start and stop über built-in button
current status is über each one LED per cell and three general LEDs signaled
direct viewing of the measured values live or recorded with our UniDisplay (order no. 2400)
Parameter settings über PC or UniDisplay möglich
Support by the LogView software.
LogView is a very comprehensive yet easy to use evaluation program for the PC that supports a variety of different measurement and charging devices from the modeling field.
Supported by the GNU DataExplorer software.
The GNU DataExplorer is as extensive as LogView and in addition to Windows also für the Mac and Linux suitable.
simple and clear evaluation of the measurement results with the help of diagrams on the PC.
free software updates via PC with the help of the supplied USB interface cable möglich (software on the Internet at www.sm-modellbau.de in the menu Softwareupdates erhältlich)
Thanks to its compact size and low weight, it can be used almost anywhere

For technical data and the complete range of functions, please refer to the operating instructions.

Technical data:

Voltage measurement range: 0 to 60 V (65 V) at each input.
Power supply: directly from the drive battery (4 V - 65 V).
external connections: 1 time servo pulse from the receiver
1 time servo pulse output to controller.
1 time temperature sensor (- 40 °C to + 125 °C).
1 time external alarm transmitter (beeper).
Dimensions: 37 x 42 x 12mm
Mass: 11g

Scope of supply:

LiPoWatch
Connection cable to the receiver
Extensive color instruction manual

Contact data

First name

Last name

E-Mail