SM Modellbau - LiPoWatch with USB- Interface

SKU: 235440

Category: LiPo Watch

Manufacturernumber: 2600

Die Einzelzellenüberwachung schützt Ihren Antriebsakku vor Tiefentladung und speichert gleichzeitig als Datenlogger die Spannung jeder einzelnen Zelle.

79,50 €

incl. 19% VAT , plus

Currently out of stock

Notify me when this product is available

piece

Currently out of stock

The single cell monitor protects your drive battery from deep discharge and simultaneously stores the voltage of each individual cell as a data logger.

The LiPoWatch is a single cell monitor for up to 15 cell (15S) LiPo and LiFePo batteries. It monitors each cell of the battery pack and, if the voltage falls below an adjustable threshold, can shut down the drive so that the cells are not deeply discharged. The externally connectable beeper (order no. 2610) reports when the voltage falls below the threshold and other errors.
In addition, the LiPoWatch records the voltages of all connected cells individually and thus serves as a data logger for monitoring the battery. The built-in memory is so large that the flights of an entire weekend can be recorded without further ado.
In addition to the voltages, a temperature can also be measured and stored with our standard temperature sensor.
A red LED at each cell connection allows a quick overview of which cell in the pack has triggered the undervoltage message or other warning.

Via our UniDisplay all measured values of the LiPoWatch can be read out and viewed directly at the flying site. Likewise, the minimum values of the last measurement series can be read. A live display is also possible with it. All settings, such as the storage rate, can of course also be conveniently programmed via the display. The evaluation of the data is uncomplicated with the well-known software LogView or the GNU DataExplorer.
Due to its low weight and compact size, the LiPoWatch can be used in almost any application. Weighing only 11 g, it is just as suitable for monitoring in a small 2s model or hubi with 3 cells as it is in a 3 meter aerobatic plane with a 14s power drive.

And this is what the LiPoWatch can do:

monitoring and measurement of 2s to 15s batteries with data logger
control / shutdown of the drive with adjustable parameters
direct indication of errors of a cell with an own LED each
connection for a temperature sensor (order no. 2220)
connection for an external signal generator/beeper (order no. 2610)
recording of the internal temperature recording of the servo pulse from the receiver and the servo pulse to the controller
large internal data memory for almost 75000 measurement records (depending on the number of cells)
Storage rates from 4 measurements per second to 1 measurement every 10 seconds allow recording time up to more than 200 hours (depending on the number of cells)
Power supply automatically by the drive battery
Start of recording triggered by time lapse, voltage dip or receiver pulse
manual recording start and stop via built-in button
current status is signaled by one LED per cell and three general LEDs
direct viewing of the measured values live or recorded with our UniDisplay (order no. 2400)
Parameter settings via PC or UniDisplay possible
Support by the LogView software
LogView is a very comprehensive and yet easy to use evaluation program for the PC, which supports a wide range of different measuring and loading devices from the model building sector.
Support by the GNU DataExplorer Software
The GNU DataExplorer is as extensive as LogView and besides Windows also suitable for Mac and Linux.
Simple and clear evaluation of the measurement results with the help of diagrams on the PC
free software updates via PC possible with the help of the supplied USB interface cable (software available on the Internet at www.sm-modellbau.de under the menu item Software Updates)
can be used almost anywhere thanks to its compact size and low weight

Technical data:

Voltage measuring range: 0 to 60 V (65 V) at each input.
Power supply: directly from the drive battery (4 V - 65 V)
external connections:
1 times servo pulse from receiver
1 times servo pulse output to controller
1 time temperature sensor (- 40 °C to + 125 °C)
1 time external alarm transmitter (beeper)
dimensions: 37 x 42 x 12mm
Mass: 11g

Scope of delivery:

LiPoWatch
connection cable to the receiver
USB interface cable for evaluation of the measurement data on the PC and for later LiPoWatch software updates
detailed colored instruction manual

Contact data

First name

Last name

E-Mail

SM Modellbau

SM Modellbau - UniSens-E/ XT90 140A

Currently out of stock

65,90 € *

SM Modellbau - LiPoWatch with USB- Interface

customer also buyed: