Optotronix RC Scale Elektronik Optotronix Aurora LCU EVO2 NightShow RGB (OPT2002)

SKU: 272462

Category: Optotronix

Manufacturernumber: OPT2002
GTIN: 4047991020026

63,90 €

incl. 19% VAT , plus

Lager Lieferant

Lieferzeit: Must be ordered. Ready for shipment in 3-6 days after order.

Notify me when this product is available

piece

Lager Lieferant

Lieferzeit: Must be ordered. Ready for shipment in 3-6 days after order.

For the perfect show, upgrade your effect model with up to 30m RGB LED Bändern. The Aurora NightShow RGB creates various lighting effects (Color Fading, Color Jumping, Permanent Color, Color Strobo,...) which can be controlled from the transmitter and the speed is infinitely variable. The Aurora NightShow RGB can now be operated with up to 13 volts (3S LiPo/LiIon) and at an unbeaten 16x48 millimetres and a weight of 11 grams it offers concentrated light output in the smallest of spaces.

Coloured light power
6 outputs or 2x RGB outputs with an output power of up to 5 amperes continuous current per colour channel. This allows up to 30 meters of standard RGB-LEB band (30 LEDs/m) to be operated.

Lightweight
The Aurora NightShow RGB is especially small and light with only 11 grams.

Child-friendly operation
An easy-to-operate push-button and 8 status LEDs enable easy, fast and direct operation and programming at any time. No complicated programming via PC. The intelligent firmware of the Aurora NightShow RGB allows you to easily program the RC lighting!

Extensive lighting functions
There are 4 different effective RGB lighting effects available: Color Fading, Color Jumping, Permanent Color and Color Strobo The speed of the effects is infinitely adjustable from the transmitter. 5 special flight show modes generate the perfect light show for your flight program, e.g. adapted to the throttle position.

FailSafe emergency lighting
A very important and useful function is the indication of signal conditions during the flight, live in the sky. If the model is in FailSafe mode due to signal errors, the Aurora NightShow RGB switches to emergency lighting mode. All RGB LEDs are permanently red and flash white 2x per second.

Operation up to 13V
>The Aurora NightShow RGB can now be operated with up to 13 Volts (3S LiPo/LiIon). This also makes it possible to connect LED lights that are designed for 12 volts (e.g. LED lights, HV LEDs,...).

Stand Alone
At the push of a button you can jump to standalone mode; the selected outputs remain active even without a receiver signal. Ideal for exhibitions and building evaluations.

Battery monitoring
>The battery charge status can be queried in six stages at the touch of a button. If the battery voltage is critical, a warning is issued and the LCU stops operation. If the battery is not disconnected from the electronics, the electronics will automatically stop operation.

Improved quiescent current and wake-up time
If the receiving system is switched off, the Aurora NightShow RGB goes into sleep mode and only has a quiescent current of 50µA. As soon as the receiver system is activated, the lighting electronics also wake up again.

Maximum safety
Consumers that have nothing to do with the receiver system should also not be connected to it. Therefore the Aurora NightShow RGB has a galvanically isolated signal input (optocoupler).

Simple installation
As an accessory the Aurora Plug is available, a plug connector with gold-plated contacts that simplifies and accelerates the process of model lighting.

Technical data (caps):

Höhe: 5,8mm
Weight: 11g

Technical Data (Lighting Electronics):