FMS - F7F Tigercat PNP mit Reflex Gyro - 1700mm

D-Power

FMS - F7F Tigercat PNP mit Reflex Gyro - 1700mm

SKU: 358991

Category: warbirds

Manufacturernumber: DPFMS098PBU-REF
GTIN: 4251014793471

909,00 €

incl. 19% VAT , plus

Lager Lieferant

Lieferzeit: Must be ordered. Ready for shipment in 3-6 days after order.

Notify me when this product is available

piece

Lager Lieferant

Lieferzeit: Must be ordered. Ready for shipment in 3-6 days after order.

The F7F Tiger Cat from FMS is a very detailed aircraft with 1700mm wingspan, which impresses not only with its prototypical appearance, but also with its enormously prototypical flight pattern.
The F7F Tiger Cat features numerous scale details that make the model look like an original not only in the air but also on the ground. Fake engines, machine guns, perimeter rivets, pilot figure and working LED lighting provide an original look.

With the powerful brushless outrunners in combination with two 60A brushless controllers (with 10A UBEC) and a separately available 6S battery, the drive system offers enormous power for prototypical flight action.

The model is made of EPO rigid foam and comes ready to fly out of the box with all electronics fully installed. Motors, controllers, servos for ailerons, rudder and elevator as well as the landing flaps are ready installed. The sturdy metal retractable landing gear is also installed ready to go. All that is needed is a suitable battery and the remote control system.

Thanks to the sturdy construction of EPO hard foam material, the model forgives many a hard landing. Foam parts can be quickly and permanently repaired with superglue if damaged. No glue is usually needed to assemble the model. Electronics and landing gear are pre-installed and wings and tail surfaces are screwed together for assembly and disassembly.

Included with this model is an FMS Reflex system programmed specifically for this aircraft. This electronic stabilization system is designed to assist, but not interfere with, pilot control commands. The Reflex system works with both PPM and SBUS inputs, and works natively with all common rudder control systems. If the Reflex system is assigned to a 3-channel switch, you can choose between 3 different modes:

Stabilized Mode: When releasing the control sticks, the model is automatically brought into a neutral flight position, which offers beginners and inexperienced pilots a lot of safety in dicey situations.
Optimized Mode: The gyro system of the Reflex system counteracts external influences such as gusts of wind or crosswinds and keeps the model precisely in a stable position.
Off: The Reflex System can be turned off completely.

Features:

PNP model made of robust EPO hard foam material
2 powerful brushless outrunner motors, high power controller and servos with metal gearbox ready installed
Robust electric retractable landing gear made of metal
Front wheel with 62 mm diameter, rear wheels with 84 mm diameter for take-off and landing on both paved and grass runways.
Reflex stabilization system with gyro (compatible with all receivers with at least 4 channels) included
Functional LED lighting with high luminosity
functional landing flaps
screwed construction and multi-connectors
large battery compartment for 6S 5000mAh LiPos
many scale Details
ready painted
included decal sheet for various design possibilities
including 3-blade propeller 13x9"
about 6 minutes flight time with 4S 7.4V 2600mAh
including richly illustrated assembly instructions

Technical data:

Wingspan: 1700 mm
Length: 1484 mm
Flight weight: about 5450 g
Wing area: 49.5 dm²
Wing loading: 110 g/dm²
Motor: 2x Brushless 4250-KV440
ESC: 2x 60A with 10A BEC
Servos: 7x 13g Analog MG and 5x 23g Digital MG

Required accessories:

Remote control: min. 6 channels
Receiver: min. 6 channels
Battery: 6S LiPo 5000mAh
Charger

Contact data

First name

Last name

E-Mail